by Staff Writer | Feb 20, 2015 | CSI, Wiring and Electricity
THE MYSTERY An ACES’ CSI (Control Systems Investigator) was called to the scene of an overheating side-seam drum welder. This is a primary machine for this customer, a barrel manufacturer. Its job is to take a flat piece of metal, roll it into a hoop and weld it down...
by Staff Writer | Oct 24, 2014 | Control Systems, CSI, Wiring and Electricity
THE MYSTERY One of ACES’ customers manufactures drums and containers for industrial uses. They called us due to an issue with their helium tester, a machine which injects the gas into newly manufactured barrels, seals them and raises them into a vacuum chamber to be...
by Staff | Feb 1, 2013 | Control Systems, CSI, Motion Control, Programming
THE MYSTERY A barrel manufacturer called ACES with a problem: The heads that formed the beads of the barrels had started moving inconsistently and roughly enough that when they stopped the whole machine would jerk. Just two years earlier ACES had installed a brand new...